When the roots blower is used, it is necessary to maintain the transmission belt. After 24 hours of use, the belt tension is adjusted. After a week's use, the belt tension needs to be adjusted again. Under normal circumstances, the new belt can be replaced in about a year. This is the routine maintenance of Roots blower belt. So, let's find out what causes the loose belt of Roots blower. What happens to the loose belt and how to do it.

罗茨风机皮带会出现松动的原因，一般如下，皮带老化、温度过高、型号不符以及生产安装问题，跟着小编来了解一下吧。

The reasons for looseness of Roots blower belt are generally as follows: belt aging, high temperature, inconsistent model and production and installation problems. Follow Xiaobian to understand.

原因之一：皮带对于罗茨鼓风机来说是消耗品，罗茨鼓风机运行中皮带会被拉伸，出现变松的现象，这种情况属于正常，及时调整张紧度即可，当三角带使用时间更长时，会出现老化的情况，皮带会慢慢的损耗，出现边变松、破裂甚断裂的现象，则需要进行更换上新的皮带。

One of the reasons: the belt is a consumable for the roots blower. During the operation of the roots blower, the belt will be stretched and become loose. This is normal. Adjust the tension in time. When the triangular belt is used for a longer time, it will be aged, and the leather belt will be slowly worn out. If the edge becomes loose, broken or even broken, it needs to be replaced with a new belt.

原因之二：罗茨鼓风机运行中，皮带在高速运转，皮带与皮带轮之间的摩擦会发热；反过来，罗茨风机过热也会导致皮带热上加热，尤其是夏天温度较高。还有，如遇到罗茨风机故障，比如，管道阻塞、压力增加、润滑油过多、叶轮墙板机壳间摩擦等，这些故障都会导致罗茨风机过热，会将热量传递到皮带，让皮带变得更加的松。这种情况下需要先解决罗茨风机过热的情况，在巡检过程中，排除管道阻塞、压力增加、润滑油过多、叶轮墙板机壳间摩擦的情况。皮带摩擦热加上罗茨风机运转本身产生的热量，造成皮带损耗加剧，更容易出现皮带变松。

The second reason: during the operation of Roots blower, when the belt is running at high speed, the friction between the belt and the pulley will heat up; Conversely, overheating of Roots blower will also lead to belt heating, especially in summer. In addition, in case of Roots blower faults, such as pipeline blockage, pressure increase, excessive lubricating oil, friction between impeller wallboard and casing, these faults will lead to overheating of Roots blower and transfer heat to the belt, making the belt more loose. In this case, the overheating of Roots blower needs to be solved first. In the process of patrol inspection, the situations of pipeline blockage, pressure increase, excessive lubricating oil and friction between impeller wallboard and casing need to be eliminated. The friction heat of the belt and the heat generated by the operation of Roots blower aggravate the loss of the belt and make it easier for the belt to become loose.

原因之三：罗茨鼓风机皮带变松的原因还可能是皮带与皮带轮不符，尤其是更换上新的皮带时，如果更换皮带型号不符，如槽型不对或者长度不符，都会造成出现变松的情况，遇到这种问题，需要更换型号相符的皮带。

Reason 3: the loose belt of Roots blower may also be due to the inconsistency between the belt and the pulley, especially when replacing a new belt. If the replacement belt model is inconsistent, such as the wrong groove type or length, it will lead to looseness. In case of this problem, it is necessary to replace the belt with the same model.

原因之四：罗茨鼓风机质量问题，如果风机厂家生产中出现问题，风机生产和安装精度达不到，两皮带轮不在同一水平面上或者间距不合适，罗茨风机在运转中皮带很容易变松，这种情况需要对风机机头和电机进行调整，将机头与电机的带轮调整到合适的位置，然后更换皮带，再对皮带进行调整即可。

Reason 4: the roots blower has quality problems. If there are problems in the production of the fan manufacturer, the fan production and installation accuracy cannot be reached, the two pulleys are not on the same horizontal plane or the spacing is inappropriate, and the belt of the roots blower is easy to become loose during operation. In this case, it is necessary to adjust the fan head and motor, adjust the pulley of the head and motor to the appropriate position, and then replace the belt, Then adjust the belt.

以上就是为大家介绍的有关山东回转风机的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sddyfd.com/

The above is the detailed introduction of Shandong rotary fan. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.sddyfd.com/